Amphenol RJS-5ES Series Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Amphenol RJS-5ES Series. Amphenol RJS-5ES Series 13 halaman. Unmanaged ethernet switch with 5/9 ports 10/100 mbps
Halaman Cetak
Section 1
Overview
Operation
Performance
Specifications
Standards
and Safety
Unmanaged Switch User Manual
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
Downloaded from
Elcodis.com
electronic components distributor
General Information
This manual will help you install and maintain the Amphenol Industrial Ethernet
Unmanaged switches. These products are extremely easy to install and operate because
little or no user configuration is required. Once the Ethernet connections are made and the
unit is powered up it will immediately begin to operate.
Unlike an Ethernet hub that broadcasts all messages out all ports, these witches will
intelligently route Ethernet messages only out the appropriate port. The major benefits of
this are increased bandwidth and speed, reduction or elimination of message collisions, and
deterministic performance when tied with Unmanaged systems.
These switches support both 10BaseT (10 Mbps) and 100BaseTx (100 Mbps) on their
RJ45 ports. Each of these ports will independently auto-sense the speed, allowing you to
interface to regular or fast Ethernet devices. Some models also have 100BaseFX (100
Mbps) fiber optic port(s).
Refer to Section 6 for more information on operation and features.
These general specifications apply to these switches. Refer to Section 7 for complete
technical specifications.
Ports (models vary)
10/100BaseT(x) (Shielded RJ45), 100BaseFX (SC or ST connectors)
Required Voltage
10 - 30 VDC (see Section 7 for power consumption for each model)
IEEE 802.3 (10BaseT), 802.3u (100BaseTX), 802.3x (Full Duplex)
Ethernet Standards
Ethernet Protocols
All standard IEEE 802.3 protocols supported
Speed Per Port
RJ45: 10 Mbps (half duplex) or 200 Mbps (full duplex)
Fiber: 100 Mbps (half duplex) or 200 Mbps (full duplex)
Ethernet Isolation
1500 Volts RMS (for 1 minute)
-40 to 85 °C
Operating Temp.
Humidity
5 to 95% (non-condensing)
Screw Terminals
14 AWG max. (tighten to 3.48 in-lbs. max.)
The Amphenol Industrial Ethernet Switch meets the following standards:
Electrical safety - UL 508, CSA C22/14; EN61010-1 (IEC1010)
EMI emissions - FCC part 15, ICES 003, EN55022; Class B
EMC immunity – EN61326-1 (EN61000-4--2, 3, 4, 5 and 6)
Hazardous locations – UL 1604, CSA C22.2/213 (Class 1, Div. 2), Groups A, B, C, D;
Cenelec EN50021 (Zone 2) EEx nA II T4 X (-40°C ≤ T
Install the Amphenol Industrial Ethernet Switch in accordance with local and national
electrical codes.
Lightning Danger: Do not work on equipment during periods of lightning activity.
Do not connect a telephone line into one of the Ethernet RJ45 connectors.
≤ +85°C)
a
Page 3 of 13
Last Revised: 11-Jul-06