Amphenol nrgCONTROL-BT Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol Amphenol nrgCONTROL-BT. Amphenol nrgCONTROL-BT 12 halaman.

Section Two: Installation

Please read and understand all instructions before starting installation. If you have questions, contact Amphenol Network

Solutions Technical Support at [email protected] or call 1-509-926-6000.

When you receive the equipment, carefully unpack it and compare it to the packaging list. Please report any defective or

missing parts to Amphenol Network Solutions Quality at [email protected] or call 1-509-926-6000. Keep all

documentation that comes with your shipment.

Amphenol Network Solutions is not liable for transit damage. If the product is damaged, please report it to the carrier and

contact Amphenol Network Solutions.

For service or warranty information, please visit Amphenol-ns.com and click on the "Support" tab, email Amphenol

Network Solutions at [email protected] or call us at 1-509-926-6000.

NOTE: The nrgCONTROL-BT is suitable for installation as part of both a Common Bonding Network (CBN) and an

Isolated Bonding Network (IBN) for installation in Network Telecommunications Facilities and OSP.

NOTE: Do not remove terminal protection brackets until panel is installed in a rack. If the panel is transported outside of

the shipping container, make sure the terminal protection brackets are installed.

NOTE: The nrgCONTROL-BT provides power to the monitoring circuitry in the connected nrgSMART™ panels. Some of

these panels require power from the nrgCONTROL-BT to illuminate their front-panel LEDs, and WILL NOT have

illuminated LEDs without being connected to the nrgCONTROL-BT. See the installation guides for each nrgSMART panel

for more details.

ALERT! Verify that all connections meet requirements specified in local electric codes or operating company

guidelines before supplying power. Unit shall be protected by a listed circuit breaker or branch-rated fuse rated

maximum 10A.

ALERT! Install this product within a Restricted Access Location (RAL) where access is through the use of a tool,

lock and key, or other means of security and is controlled by the authority responsible for the location.

ALERT! Only qualified technicians may install and maintain this product.

WARNING! Failure to properly ground this equipment can create hazardous conditions for installation personnel

and for the equipment.

Amphenol Network Solutions

nrgCONTROL-BT

509.926.6000 — amphenol-ns.com