Amphenol Socapex RJSMLAC 8MG CAPS VAC Panduan Pengguna Perangkat Keras - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna Perangkat Keras untuk Router Jaringan Amphenol Socapex RJSMLAC 8MG CAPS VAC. Amphenol Socapex RJSMLAC 8MG CAPS VAC 15 halaman. Ip67/68 rugged ethernet managed switch
Juga untuk Amphenol Socapex RJSMLAC 8MG CAPS VAC: Panduan Pengguna Perangkat Keras (14 halaman)
Halaman Cetak
1. Prepare the cable for termination process and slide onto
the cable the items in the order shown on figure 1.
2. Screw the backshell at the rear of the connector.
3. Fold back the braid on the outer jacket and fix it (figure
2).
4. Install the braid as shown on figures 3 and 4:
Release the braid and cover the backshell (a) and the
connector's shell. Slide the first ring (b) over the braid.
Fold back the braid on the ring (b) and slide the second
ring (c) over the braid and the first ring (b). Screw the last
ring (d) at the rear of the backshell. If necessary, fix the
extra braid on the outer jacket of the cable. If this
installation (double folding of the braid) is not possible,
refer to figure 5: Slide the first ring (b).
Release the braid and cover the backshell (a) and the
connector's shell. Cut the braid as shown. Slide the second
ring (c) over the braid and the first ring (b).
Screw the last ring at the rear of the backshell.
5. Install the heat-shrink molded piece.
Ethernet
wiring
Ethernet plug
part number
RJSMLAC 8MG CAPS UM rev. 3
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
These switches provide connections to Ethernet devices on the battlefield. Typically a
port is used to connect to another Ethernet switch or hub that is connected to the main
Ethernet backbone. The other Ethernet ports are then connected to Ethernet devices such
as communication systems, Ethernet I/O, or industrial computers. Electrical isolation is
provided on the Ethernet ports for increased reliability.
Please follow normal Ethernet wiring practices when installing these switches.
Use data-quality (not voice-quality) twisted pair cable rated category 5E (or better) with
standard RJ45 connectors. You can use all standard existing RJ45 Cat5E cordset and
transform it into an environmental connector, without any cabling operation, and without
any tool!
The IP68 rated RJ45 plug is field installable and does not
require any special tools. It can be installed over any standard
Ethernet patch cable (though you may have to remove the
latch cover if it has an over-molded boot). Refer to the
diagrams for mechanical and assembly details.
Part number of the plug to be used: RJF TV 6 M G. This plug
may be assembled with 4 different coding. Use the coding A
to make your assembly. For more details, please consult:
http://www.rjfield.com
.
Page 9 of 14
Last Rev: 14-Dec-15