Dover Triton 9600 Prosedur Konversi - Halaman 4
Jelajahi secara online atau unduh pdf Prosedur Konversi untuk Peralatan Industri Dover Triton 9600. Dover Triton 9600 10 halaman.
Juga untuk Dover Triton 9600: Manual Konversi (4 halaman)
Halaman Cetak
REMOVE 9640 DISPENSER
1. Slide the 9640 dispenser out on its rails. Turn the
dispenser power switch to the OFF (O) position and
disconnect the power cord. The power cable
connector is located next to the power switch, in the
top front area of the dispenser. Disconnect the data
cable at the connector located on the left side of the
dispenser.
Turn dispenser power OFF and
disconnect power cable.
Disconnect EJ-to-Mech Data Cable
2. Press the release tabs located on each slide and
remove the dispenser from the cabinet. Warning:
Two persons should be used to remove it from
the ATM cabinet!
T
S
RITON
YSTEMS
9640-
-9600
TO
C
P
ONVERSION
ROCEDURE
3. Using a medium flat-blade screwdriver, remove the
screws that secure the inner slide members to the
left and right brackets on the 9640 dispenser. Retain
the slides for a later step.
Slide Release Tab
Press release tabs and remove 9640 dispenser
from cabinet slides. Use a two-person lift!
Remove three screws that secure each slide
member to 9640 dispenser chassis.
4