Dahua VTO2000A-B Panduan Pemasangan Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemasangan Cepat untuk Sistem interkom Dahua VTO2000A-B. Dahua VTO2000A-B 13 halaman. Video door entry system
Halaman Cetak
VTH Monitor Configuration
To configure the VTH unit use the built in menu within the monitor itself, VTH units do not support web browser configuration.
Select Settings and input the engineer password: 002236 (default)
The Product Info menu is used to set the room number of the VTH and to configure the unit as a Master or Extension unit. When
configuring a modular system, each monitor will be configured as a Master.
In the Room No field input the room number, such as 1 for apartment 1.
Select Settings and then Project Settings, in the project settings menu select NetSet to configure the VTH network settings. When
configuring the network address of the VTH it is vital to ensure the IP address range is within the same Subnet as the VTO.
For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the
VTH, select Network and input the VTO units IP address and set Enable Status to ON.
9
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com