Dahua H Series Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Dahua H Series. Dahua H Series 19 halaman. Ir bullet network camera
Juga untuk Dahua H Series: Panduan Memulai Cepat (20 halaman), Panduan Memulai Cepat (20 halaman), Panduan Memulai Cepat (19 halaman)
Halaman Cetak
Do not place heavy stress on the device, violently vibrate or immerse it in liquid during installation.
An emergency disconnect device must be installed during installation and wiring at a readily
accessible location for emergency power cut-off.
We recommend you use the device with a lightning protection device for stronger protection
against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations.
Ground the function earthing portion
are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that
the power supply of the device is connected to a power socket with protective earthing.
The dome cover is an optical component. Do not directly touch or wipe the surface of the cover
during installation.
Operation Requirements
The cover must not be opened while the device is powered on.
Do not touch the heat dissipation component of the device to avoid the risk of getting burnt.
Use the device under allowed humidity and temperature conditions.
Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it,
to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering.
When using a laser beam device, avoid exposing the device surface to laser beam radiation.
Prevent liquid from flowing into the device to avoid damage to its internal components.
Protect indoor devices from rain and dampness to avoid electric shocks and fires breaking out.
Do not block the ventilation opening near the device to avoid heat accumulation.
Protect the line cord and wires from being walked on or squeezed particularly at plugs, power
sockets, and the point where they exit from the device.
Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the
lens.
The dome cover is an optical component. Do not directly touch or wipe the surface of the cover
when using it.
There might be a risk of electrostatic discharge on the dome cover. Power off the device when
installing the cover after the camera finishes adjustment. Do not directly touch the cover and
make sure the cover is not exposed to other equipment or human bodies
Strengthen the protection of the network, device data and personal information. All necessary
safety measures to ensure the network security of the device must be taken, such as using strong
passwords, regularly changing your password, updating firmware to the latest version, and
isolating computer networks. For the IPC firmware of some previous versions, the ONVIF
password will not be automatically synchronized after the main password of the system has been
changed. You need to update the firmware or change the password manually.
of the device to improve its reliability (certain models
IV
Quick Start Guide