Dahua H Series Panduan Memulai Cepat - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Dahua H Series. Dahua H Series 19 halaman. Ir bullet network camera
Juga untuk Dahua H Series: Panduan Memulai Cepat (20 halaman), Panduan Memulai Cepat (20 halaman), Panduan Memulai Cepat (19 halaman)
Halaman Cetak
The Device initialization interface is displayed.
Select the devices that need initialization, and then click Initialize.
Step 6
The password setting interface is displayed. See Figure 2-2.
Step 7
Set and confirm the password of the devices, then enter a valid email address, and then click
Next.
The final setting interface is displayed.
Password can be modified or reset in System Settings.
Step 8
Select the options according to your needs, and then click OK.
The Initialization interface is displayed after initialization is completed. Click the success
icon ( ) or the failure icon ( ) for the details.
Click Finish.
Step 9
The device status in the Modify IP interface (Figure 2-1) turns to Initialized.
2.2
Modifying Device IP Address
You can modify IP address of one or multiple devices in one time. This section is based on
modifying IP addresses in batches.
Modifying IP addresses in batches is available only when the corresponding devices have the
same login password.
Step 1
Do Step 1 to Step 4 in "2.1 Initializing Device" to search devices in your network segment.
Figure 2-2
Password setting
5
Quick Start Guide