Dovpo TOPSIDE Top Fill Squonk Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Rokok Elektronik Dovpo TOPSIDE Top Fill Squonk. Dovpo TOPSIDE Top Fill Squonk 4 halaman.

7. Low-voltage Protection: if battery level is lower than

3.2v, when you press the Fire Button, the screen will

display "LOW BATTERY"

Firmware update:

Please Note: This device is built with the, simple to

understand and easy to use wattage mode/bypass

mode as the default firmware. If you prefer temperature

control, a TC firmware is available for you to download

and flash to your device.

Check your firmware version by holding "+" and "-"

buttons for 2s when the device is off.

Go to the following link to check if there's an update

available for your TOPSIDE firmware.

https://www.dovpoecig.com/topside-squonker

Follow the instruction on this webpage to update your

TOPSIDE firmware to the latest version.

WARNING

1. Please use all accessories as intended to avoid

damage to your device.

2. When not using your device for a long period of time,

please take out the batteries from the device.

3. Should damage occur, please do not attempt to repair

by yourself. Use any available warranty, in the first

instance contact the reseller you purchased the unit from

4. Please keep this product and accessories away from

children and pets.

5. To clean the device, use only a slightly damp towel, and

do not allow moisture to get inside of the device.

6. Over-temperature Protection: if the board temperature

goes over 75℃/167°F, the device will cut power, when

you press Fire Button, the screen will display

7. Low-voltage Protection: if battery level is lower than 6.4v

when you press the Fire Button, the screen will display

"LOW BATTERY".

"TOO HOT"