Amphony 1500 Panduan Pengguna dan Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Instalasi untuk Penerima Amphony 1500. Amphony 1500 9 halaman. 5.8 ghz digital wireless audio transmitter / receiver
Juga untuk Amphony 1500: Spesifikasi Teknis (2 halaman), Panduan Pengguna dan Instalasi (17 halaman), Informasi Produk (4 halaman), Spesifikasi (4 halaman), Panduan Pengguna dan Instalasi (8 halaman)
Halaman Cetak
User and Installation Guide
Technical Specifications
Transmitter:
Audio transmission method:
Digital
Transmitter frequency:
5.8 GHz
Error correction:
1/2 rate FEC
Transmitted data rate:
> 3 Mbps
Transmitter operating range:
max. 200 ft. line of sight, max. 50 ft. through walls and ceilings
Audio sampling method:
128 times oversampling
Receiver:
Output level:
1 Vrms
Frequency response:
2 Hz ... 23 kHz
Signal-to-noise ratio:
95 dB (Transmitter / Receiver, A-weighted)
Total harmonic distortion:
typ. 0.006 % (- 84 dB)
Overall audio latency:
< 1 ms
Channel separation:
typ. 86 dB
Page 12
R
User and Installation Guide
Step 2
Placing the transmitter
The operating range essentially depends on how many obstacles there are
between the transmitter and the receiver. Therefore, it should be carefully
considered where to place the transmitter.
Below, two examples are given. In the first example, there are 4 walls
between the transmitter and the receiver. The transmission may be
interrupted. By locating the transmitter such as in the second example,
reliable transmission to all of the 6 rooms is possible.
Also, the elevation of the transmitter as well as the presence of reflecting
walls will influence the range.
It is suggested to experiment in order to find the best location for the
transmitter.
Example 1: Poorly chosen
transmitter location
R
Example 2: Improved
transmitter location
Page 5
100
95
75
25
5
0