1byone O0000-0751 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Meja putar 1byone O0000-0751. 1byone O0000-0751 4 halaman. Briefcase turntable

Listening to a record

1. Lift the buckle on the front of the turntable and open the lid.

2. Turn the power & volume control knob clockwise.

3. Place a record on the turntable platter and select the desired speed

(33/45/78) according to the record. NOTE: when playing a 45 rpm record, use

the included 45 rpm adapter located in the holder near the tone arm.

4. Open the tone arm clip to release the tone arm. Push the lift lever backward

to raise the tone arm and gently move the tone arm to the desired position

over the record. The turntable will begin to spin when the arm is moved

toward the record. Push the lift lever forward lower the tone arm slowly onto

the desired position on the record to begin playing the record. Please note:

The record will begin to spin only when the tone arm is moved over to the

record if the Auto Stop is turned on.

If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automati-

cally when nished(For some few vinyl records, it will stop when it does not

come to the end or it will not stop when it comes to the end). If Auto Stop

Control is turned OFF, record will NOT stop automatically when nished.

LINE IN function

1. Stop the vinyl playing.

2. Connect your iPod, MP3 player, mobile phones etc. to the LINE IN port with a

3.5mm-3.5mm audio cable(not included).

3. You can enjoy the music of iPod, MP3 player, mobile phones etc. at the

turntable player.

MUSIC playback on your own speaker system

1. Connect your own speaker system to the RCA port with a RCA-3.5mm audio

cable (not included).

2. You can enjoy the music of the vinyl records at your own speaker system.

MUSIC playback on your headphone

1. Connect your headphone to the headphone port.

2. You can enjoy the music of the vinyl records via your headphone.

How to Replace the Turntable Stylus (Needle)

Removing the Stylus from the Cartridge

1. Place a screwdriver at the tip of the stylus and push downward as shown in

direction "A".

2. Remove the stylus by pulling the stylus forward and pushing downward.