Amphony 1550 Panduan Pengguna dan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Instalasi untuk Peralatan Perekaman Amphony 1550. Amphony 1550 12 halaman. 5.8 ghz digital wireless audio transmitter/amplifier
Juga untuk Amphony 1550: Pertanyaan yang Sering Diajukan (5 halaman), Spesifikasi Teknis (2 halaman), Perbandingan Fitur (1 halaman), Spesifikasi (4 halaman), Spesifikasi (4 halaman), Informasi Produk (4 halaman), Panduan Pengguna dan Instalasi (13 halaman), Panduan Penggunaan dan Instalasi (6 halaman)

User and Installation Guide

Step 3

Placing the transmitter and amplifiers

For best reception, we recommend that each amplifier be placed within the line

of sight from the transmitter. If possible, each amplifier should be placed right

side up with its front toward the transmitter.

The transmitter should be placed at an elevation such that there are no

obstacles between the transmitter and amplifiers (line of sight) in an area where

there will be the least amount of traffic. We suggest that you place the

transmitter on top of your audio source. Example 1 below shows the optimum

placement of the transmitter and an amplifier. If no line of sight is possible, place

the transmitter and amplifiers such that there is the minimum possible number of

walls and obstacles between the transmitter and each amplifier.

The amplifiers can also be placed as shown in example 2. In this case, no line-

of-sight connection exists and the operating range is reduced.

You can mount the amplifiers vertically by using the 2 screw openings at the

bottom of each amplifier. If the amplifiers are mounted vertically, the operating

range is reduced compared to mounting the amplifiers right side up.

Each amplifier incorporates a directional antenna which prefers signals

transmitted toward the front of the amplifier. Therefore, the front of the amplifiers

should always be facing toward the direction of the strongest transmitter signal.

By properly orienting each amplifier, interference from other signal sources can

be minimized.

We suggest that you experiment with placement in order to find the best location

for the transmitter and amplifiers.

Note: This product will not work properly from within an enclosed metal cabinet.

Transmitter

line of sight

Example 1: Amplifier placed

on top of a speaker

Amplifier

Speaker

Transmitter

indirect connection

(reflected signal)

Example 2: Amplifier mounted

vertically behind a speaker

R R

Amplifier

Speaker

Page 4