Amphony 1550 Panduan Pengguna dan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Instalasi untuk Peralatan Perekaman Amphony 1550. Amphony 1550 12 halaman. 5.8 ghz digital wireless audio transmitter/amplifier
Juga untuk Amphony 1550: Pertanyaan yang Sering Diajukan (5 halaman), Spesifikasi Teknis (2 halaman), Perbandingan Fitur (1 halaman), Spesifikasi (4 halaman), Spesifikasi (4 halaman), Informasi Produk (4 halaman), Panduan Pengguna dan Instalasi (13 halaman), Panduan Penggunaan dan Instalasi (6 halaman)

Halaman Cetak
Amphony 1550 Panduan Pengguna dan Instalasi
User and Installation Guide
Problem
Audio drops out
intermittently or
crackles
Audio is noisy
Transmitter range is
extremely short
For more information, including a detailed troubleshooting guide,
visit the Amphony web site at: www.amphony.com
Possible Cause
Strong interference
Unstable power
supply
Strong interference
Transmitter volume
control set too low
Audio signal too
weak
Strong interference
Too many obstacles
Solution
In some cases, there may be
strong interference preventing
proper reception of the audio
signal which can be caused
by 5.8 GHz cordless
telephones or 5.8 GHz
wireless networks. Either
eliminate the interference,
locate the base unit of the
cordless phone in another
room, set the wireless
network to use the 5.1 GHz
frequency band rather than
5.8 GHz, relocate the
transmitter, relocate or
reorient the amplifier to
improve reception.
Ensure that the power outlet
delivers a stable voltage. Very
strong surges or voltage
fluctuations may cause audio
dropouts. Try using a surge
protector.
See under "Strong
Interference" above.
Adjust the transmitter volume
control.
See under "Audio signal too
weak" on previous page.
See under "Strong
Interference" above.
Audio will drop out if there are
too many obstacles between
the transmitter and the
amplifier (see page 4), try
relocating the amplifier or
transmitter to improve
reception.
R R
Page 8