Ampler Stellar Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Ampler Stellar. Ampler Stellar 16 halaman. 2017
Juga untuk Ampler Stellar: Panduan Pengguna (17 halaman)
Halaman Cetak13/16
Firmware update
Troubleshooting the
Firmware update
V1.1, 24.04.19
Electric system support
until it will blink dark orange.
4. The LED will blink shortly in orange and then turns
green again
Re-adjusting the sensor signal helps to improve your
bike's responsiveness and power to its original
figures.
Every Ampler has a motor controller – the so-called
brain of your bike that connects all the elctronics and
makes sure everything runs smoothly. The motor
controller is managed by Firmware (the software that
controls the hardware). To guarantee the best riding
experience, we recommend keeping your bike's Firm-
ware up to date.
Firmware update is done via the Ampler mobile app. If
your bike is connected to the app, you will get a noti-
fication in your app about the new available Firm-
ware. Please go to the Vehicle settings to update your
Firmware.
Before starting the update, make sure:
• You have the latest Ampler app version
• You have internet connection on your phone
• Your phone's battery is not running low
• The battery level of the bike is more than 25%
• You have registered and paired the app with your
bike
The update is done over Bluetooth in several steps.
All the steps are almost identical, and they need to
be done in a row. This means that after completing
the first update, if there will be a second update still
available – you will also need to complete this. The
updates should take about a minute to complete.
If you experience any problems with updating the
Firmware, please follow troubleshooting instructions
below.
Flow A
1. Turn Bluetooth OFF
2. Turn Bluetooth ON
3. Wait 10 seconds for connecting