Combi Pod Bouncer Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Furnitur Bayi & Balita Combi Pod Bouncer. Combi Pod Bouncer 8 halaman.

Assembling the Bouncer

1. Attach the Support Bar by pressing into the Seat Base until the metal pins

snap into place as shown in figure 1.

The Support Bar can only be attached one way. Notice that one side of the

Seat Base and Support Bar is notched, as shown in figure 2, and the other

side is not. Be sure you have the correct sides aligned before attempting to

attach.

2. Align the Support Bar with the Support Base as shown in figure 3. The

Support Bar and Support Base can only be attached one way. Notice the

metal post in the Support Bar and the middle hole in the Support Base

are slightly off center as shown in figure 4. Aligning these will ensure the

Support Bar and Support Base will be attached correctly.

figure 3

3. Slide the Support Base onto the Support Bar

and press firmly until you hear them snap

together as shown in figure 5. Lift up on

the Support Base to ensure they are locked

together.

- 3 -

figure 1

figure 2

figure 4

figure 5