Dowco ALUMACRAFT BOAT COVERS WITH COVER-LIFT SYSTEM Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Peralatan Perahu Dowco ALUMACRAFT BOAT COVERS WITH COVER-LIFT SYSTEM. Dowco ALUMACRAFT BOAT COVERS WITH COVER-LIFT SYSTEM 4 halaman.

Halaman Cetak
(FIG. 14)
STEP 16
A properly installed cover should look like this (see Fig. 18).
WARNING
Periodically check cover during trailering.
CAUTION
Never store a wet cover. Always allow to
fully dry prior to storage.
STEP 17
To remove the cover, open the zipper on the aft top side of the cover to release the Cover-Lift system ratchet (you can release either side)
Pull the rope and loosen the ratchet by pressing on the silver tab on the underside of the ratchet and pull the rope loose (see Fig. 19)
Remove all of the snaps and un-hook the strap system from the mounting buttons. Zip open the side ratchet pockets and release the
ratchets. Pull on tab and fold open the metal ratchet lever all the way flat until the tension is released. The cover can then be removed
Carefully fold and roll up the cover and put it in a storage compartment in the boat or in your vehicle.
(FIG. 19)
CANVAS STORAGE AND CARE
Proper care and maintenance of the canvas will maximize its useful life. The fabric used on this boat is ClimaShield® Plus, a 600 denier,
solution dyed polyester fabric that has DWR (durable water repellant) coating on the outside and a mildew inhibitor on the underside. To
keep this material performing well against the elements, the following instructions should be followed.
1. Never store the cover while it is wet or dirty. Make sure the cover is completely dry and clean prior to storage as this will help prevent
mildew growth which will damage the fabric.
2. Clean the cover with mild soap and water to remove dirt, bird droppings, etc. Do not steam, pressure wash, use harsh cleaners or bleach.
3. Prevent sharp objects, solvents and hot items from coming in contact with all canvas parts.
4. Do not allow ice, water, or snow to accumulate on the cover as this may cause damage.
4
(FIG. 15)
(FIG. 18)
(FIG. 20)
(FIG. 16)
142674-00 | 06/17