Follett Horizon Chewblet HCD700RPS Panduan Memulai Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembuat Es Follett Horizon Chewblet HCD700RPS. Follett Horizon Chewblet HCD700RPS 8 halaman.
Halaman Cetak
4 – Horizon ice machine mounting accessories
Optional wall mount bracket
23.00"
(58.4 cm)
5 – Horizon ice tube runs - specifier guidelines
Long tube runs for RIDE remote ice delivery equipment
beverage
dispenser
ice transport tube –
1 3/16" OD,
2 1/8" OD with insulation
6
Form# 6190
Optional machine stand
22.00"
(55.9 cm)
25.50"
(64.8 cm)
22.25"
(56.5 cm)
support
maximum
straps
2' (60.9 cm)
minimum of
6.00" (15.24 cm)
turn/corner
radius
transport tube slope
(toward ice machine)
1/4"
(2 cm per meter)
(17.48 cm)
18.70"
(47.5 cm)
13.00"
(33.0 cm)
wall-mounted
ice machine
1'
Important specifier notes:
1. For secure wall mounting, specify
optional wall mount bracket.
2. Wall and fasteners must support the
weight of the ice machine, bracket,
supply water and ice. Use of a backing
board may be required with hollow wall
construction.
3. Machine stand mounting adds 6.88"
(17.48 cm) to height of ice machine.
4. No dips in tube routing allowed.
5. Ice transport tube needs minimum 1/4"
per foot (2 cm per meter) pitch toward
ice machine and should be secured to
prevent dips and traps from forming.
6.88"
16.50"
(41.9 cm)
Important specifier notes:
1. 75' (22.8 m) maximum ice transport
tube run.
2. Tubing routing bends must have a
6.00" (15.24 cm) radius or larger.
3. Dips and traps are not allowed. If not
supported from underneath, secure
insulated ice transport tube at least
every 2' (60.9 cm) to prevent drips
and traps.
4. Relative humidity levels above 80%
in areas where the ice machine or ice
transport tube is located may produce
excessive condensation that will cause
water damage.
5. Contact factory for recommendations
on running tubing through a decorative
soffit or chase.
Remote 700 series ice machine