Follett Horizon Elite Chewblet HCD1410NMS Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Pembuat Es Follett Horizon Elite Chewblet HCD1410NMS. Follett Horizon Elite Chewblet HCD1410NMS 8 halaman. Ice machine with ride technology installation instructions for ice manager diverter valve
Juga untuk Follett Horizon Elite Chewblet HCD1410NMS: Manual (8 halaman), Panduan Petunjuk Instalasi (17 halaman), Panduan Petunjuk Instalasi (16 halaman)
Halaman Cetak
1 – Locating the ice machine
Horizon Elite remote Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand up to
75' (22.9 m) from the dispenser or ice bin with RIDE technology. In-cabinet mounting (RIDE applications) require special attention to
service access, unit ventilation and ice tube runs (see pages 5-7).
Top mounting – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with nugget ice.
See page 5 for compatible ice and beverage
dispenser models and top kit numbers.
2. Verify ceiling or soffit height to ensure sufficient
top clearance.
RIDE model – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with nugget ice.
Compatible dispensers include Cornelius DB/
ED/DF150/175, Lancer 4500-22N, FS-16N
and FS-44N, Servend MD150/175/200/250
SV150/175/200/250 and Follett Symphony Plus
110CM, as well as dispensers listed on page 5.
2. Coca-Cola Freestyle 7100 requires top adapter
IC Code 46751 and ice kit IC Code 46430 only,
and must be ordered from Coca-Cola. Coca-Cola
Freestyle 9100 requires top kit HSF26SC. Consult
with Coca-Cola and Follett to qualify application
prior to ordering.
3. RIDE application is approved only for Pepsi Spire
3.0, 5.0 and 4.1 designed for top mount ice
machines and requires MSP24SC for 3.0 and
MSP30SC for 5.0 and 4.1, ordered separately. For
manual fill versions of Pepsi Spire 3.0, 5.0 and 4.1,
contact factory.
4. See page 5-6 for critical clearance requirements.
4
Form# 7035
RIDE model – Follett low-profile
Vision and Cornelius PR150 ice and
beverage dispensers
Important specifier notes
1. See page 5 for critical clearance requirements.
2. Ice transport tube ships with Vision ice and
beverage dispenser (Vision applications only).
3. Ice transport tube ships with Horizon Elite
ice machine for Cornelius dispensers.
RIDE model – drop-in beverage
dispensers (by others)
Important specifier notes
1. Compatible with the following dispensers:
Cornelius 1522, 1722, 2323 and Lancer 2200,
2300, 23300.
2. Requires 12.00" (30.5 cm) of access space for
™
installation on transport tube side.
3. See page 5-6 for critical clearance requirements.
Top mount on Follett ice storage bins
Important specifier notes
1. See form# B300 for bin sizing.
2. Verify ceiling or soffit height to ensure top clearance.
3. Locate floor sink or grate and drains in front of
storage bin.
4. Do not position bin drain lines to block
Ice•DevIce
bin cart.
™
RIDE model – Follett ice storage bins
Important specifier notes
1. See form# B300 for bin sizing.
2. Locate floor sink or grate and drains in front of
storage bin.
3. Do not position bin drain lines to block Ice•DevIce
bin cart.
Remote 1010, 1410 series ice machine