Downeaster DED LP Panduan Pemilik/Operator - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik/Operator untuk Aksesori Mobil Downeaster DED LP. Downeaster DED LP 20 halaman. Dump body scissor hoist
Halaman Cetak
WARNINGS
Never exceed the Gross Vehicle Weight Rating of truck. Failure to do so may limit the vehicle's
handling characteristics. Make certain the load is evenly distributed.
Always inspect the area around the truck for safe dumping prior to operating the hoist.
Operate the hoist only when the truck is on a firm, level surface.
Always release the tailgate pins prior to raising the dump body when it is loaded. The tailgate pins
should not be released with a load against the tailgate.
Do not move the truck with the body in a raised position.
Before raising the dumper, check for adequate overhead clearance. Be alert for overhead electrical
wires.
Never attempt to work under the body while raised, with material in it.
Never attempt to work under the body, without the safety body prop, in upright position, resting on
prop rest, under an UNLOADED body only!
Always inspect for defects: broken, worn, or bent parts or weakened areas
Always keep hands, feet, and clothing away from power-driven parts. Remember it is the owner's
responsibility to communicate information on safe usage and proper maintenance of all equipment.
Always make sure personnel are clear of areas of danger when using equipment. Maintain 20'
distance from all bystanders when operating.
Inspect the unit periodically for defects. Parts that are broken, missing, or worn out must be replaced
immediately. The unit, or any part of it can not be altered without prior written permission from the
manufacturer.
Never operate equipment when under the influence of alcohol, drugs, or medication that might alter
your judgment and /or reaction time.
Keep hinge pins and bushings well greased-inspect regularly for proper operation during rotation.
Install electrical and hydraulic components AWAY from heat sources and vehicles exhaust system.
NEVER weld any component or bracket to frame of vehicle, before the rear leaf spring hanger.
Chassis steel is made from Hi Tensile materials and welding to frame may result in voided warranty
from manufacturer, increase stress at weld point, cracking do to material fatigue, and damage to
other vehicle structure components.
If welding is required, for rear of sub frame, or vehicle chassis, insure all gasoline lines, tanks, fittings,
and electrical components are protected from damage, heat and sparks. Failure to fuel system may
result in gasoline being ignited, which may result in unit, property or vehicle damage, serious injury or
death.
5