Caraudio-Systems usbLOGiC USB-NTG25 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Penyetel TV Caraudio-Systems usbLOGiC USB-NTG25. Caraudio-Systems usbLOGiC USB-NTG25 14 halaman. For mercedes benz comand aps ntg2.5 navigation systems

Halaman Cetak

3.5.

Coding

To enable the dvbLOGiC functions on the Comand, they need to be coded once on the

Comand by pressing button combinations.

3.5.1. TV-option

In order to use the usbLOGiC it is necessary to code

the Comand's TV-option. When the Comand has booted,

choose "Comand"in the tachometer-display and press

the "UP" and the "+" key of the steering wheel

until the Comand screen becomes black. After the

Comand has automatically rebooted, the option TV

is available in the menu.

Note: In some cases the steering wheel keys "UP", "DOWN", "+" and "-" can be interchanged

for coding.

3.5.2. Rear-view camera-input

In order to use the Comand's rear-view camera-input for after-market cameras, it needs to

be coded. When the Comand has booted, press the "DOWN" and the "+" key of the steering

wheel until the Comand screen becomes black. After the Comand has automatically

rebooted, it will automatically switch to its rear view camera input (green male Fakra) when

the reverse gear is engaged.

Note: In some cases the steering wheel keys "UP", "DOWN", "+" and "-" can be interchanged

for coding.

3.5.3. Reversing the coding

The above described coding can be reversed by pressing the key used for coding UP (TV-

icon) or DOWN (rear-view camera-input) and the "-" key at the same time until the Comand

resets itself.

3.6.

Activation of remote functions

To activate the remote functions, push the

"OK"-button while in usbLOGiC mode (see

chapter 4.2.) and select the Preset option.

Now select the Autostore option to activate

the controls. Numbered buttons will be

added to the menu.

Note: After loss of battery power, the activation

has to be repeated.

Version 22.12.2011

added to the

USB-NTG25