1byone ROCK PIGEON 1-AD07US03 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Meja putar 1byone ROCK PIGEON 1-AD07US03. 1byone ROCK PIGEON 1-AD07US03 17 halaman. Belt drive turntable system

1byone ROCK PIGEON 1-AD07US03 Buku Petunjuk
Setting Phono/Line Out/Turntable Switch
This product has a built-in Phono equalizer function. You can use the turntable e
if you do not have a Phono amplifier or connectable equipment with a built-in
amplifier.
Phono/Line Out/Turntable Switch
Use the
Connectable device being used
Device with Phono input
Device without Phono input
Use the built-in speaker
Connection to an Amplifier (Device with Phono input, Phono mode)
This turntable uses a moving magnetic cartridge. Set the
k of
Turntable Switch on Phono mode. Connect the Phono out cables to the Phono
input on your amplifier or pre-amplifier (Phono stage).
Tuner, Tape, or Video are not suitable for Phono inputs.
amplification of the selected input matches the type of cartridge being used. T
factory installed cartridge is 47k ohms / MM-input.
NOTE: If your amplifier does not have an input suitable for Phono cartridges, yo
will need to purchase a separate Phono amplifier for moving magnetic cartrid
This separate Phono amplifier will then connect between your turntable and y
amplifier.
Stereo System Connection (Device without Phono input, LINE mode)
Phono/Line Out/Turntable Switch
Set the
Out Jacks output analog line-level signals and can be connected directly with a
of active/powered speakers of the appropriate input of your stereo system.
The Red plug connects with the Right channel and the White plug connects wit
Left channel.
NOTE: The RCA Jacks are not designed to be connected directly to passive/
unpowered speakers in LINE mode. If connected to the passive speakers, no s
will come out.

Main Power Connection

Unpack the power adapter from the foam packing material and plug the smal
DC power jack located on the back of the turntable. Plug the power ada
into the
plug into an electrical outlet.
to set the output, as shown below.
Position of Phono-Line Out Switch
Turntable
Phono/Line Out/
Line inputs such as CD,
to LINE mode. The RCA
6
Phono
Line
Make sure the
Phono & Line