Caravaggi SP 25 Panduan Pengguna & Pemeliharaan - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna & Pemeliharaan untuk Penggiling Caravaggi SP 25. Caravaggi SP 25 19 halaman. Stump grinder

Ensure you have read & understood the entire manual

1. Place cutter wheel directly in front of the stump.

2. Using lever on handle, lock the one wheel brake- for tighter

brake adjustment, turn the knob on top of the brake lever.

3. Pull throttle full on & twist to lock.

4. Turn clutch switch to ON position.

5. Continue to grind to desired depth.

When grinding over 10" above or below ground, adjust handle

bar for better control & comfort.

On larger stumps, chips may begin to build up under wheels.

Release brake and pull machine towards you so that the chip

pile is directly under the cutting wheel.

Drop cutter wheel down on chip pile all material will discharge

from the machine area.

Be sure the brake is adjusted so that locked wheel will not

creep while grinding.

On larger stumps D

- fill with chips or change position.

DROP INTO HOLE

Just complete stump flush with ground, then go back and cut

to desired depth.

After grinding

Allow engine to cool

Wash off grinder

Inspect grinder

Load for transport

before proceeding!!!

Grinding Stump

Hints

O NOT ALLOW STUMP GRINDER WHEELS TO