Amplitec C23S Series Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengulang Amplitec C23S Series. Amplitec C23S Series 13 halaman. Dual band repeater
Juga untuk Amplitec C23S Series: Panduan Pengguna (15 halaman)
Halaman Cetak
Installation Guides
Installation Requirements
1) With Stable and independent power supply.
2) The repeater should be installed in the space without corrosive gas, smokes and leaky liquids.
3) The repeater should be installed on the wall that is ventilated, waterproof, lightning-proof and
without sunshine.
4) The height of the installation site should be safe and easy for cabling, maintaining, dissipating
heat.
Installation tools
No.
Items
1
Impact drill
2
Wrench
U-shape holder, expansion
3
pipe and screws
4
Mobile phone for testing
5
Multimeter
6
Screwdriver
7
Waterproof tape
Installation Steps
This repeater should be installed on a hard, firm and flat surface, its installation steps are as
follows:
1) Select a proper installation site according to the size and installation requirements of the
repeater.
2) Estimate and mark the sites of U-shaped back holder installation holes. Drill holes with the
impact drill. Sizes of the holes are 7mm. The expected sites are as follow: (unit: mm)
Q'ty
Remarks
1
Drill holes on wall, self-provided
1
Reinforce the interface connection, self-provided
4
Fix the device, included in the package
1
Test installation effectiveness, self-provided
1
Test voltage and wiring connection, self-provided
1
Tighten or fasten the device, self-provided
Prevent liquid from leaking into the feeder
A few
interface, self-provided
9