AMPLITUDE MS06 Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Pembicara AMPLITUDE MS06. AMPLITUDE MS06 2 halaman. In-ceiling speaker
Halaman Cetak
1
SAFETY INSTRUCTIONS
1
When the speakers are installed in the boats, ensure the boat
structure is reliable and that the speakers are firmly attached.
2
Install the speaker in a location that can structurally support
the weight of the speaker and its mounting hardware.
Otherwise it may result in the unit falling down and causing
personal injury.
3
Do not use nails, adhesives or other unauthorized devices.
Long-term use and vibrations may cause it to fall easily.
4
Do not touch or bump the woofer and tweeter. If these are
damaged, the sound will be distorted.
5
Do not listen to sound at a very high level when you are
changing the input source (for example, to tune FM / CD)
Installation or removal of cables should make sure that the
power amp / amplifier device radio is turned off.
PACKING LIST
speaker
screw
INSTALLATION
1.
2.
3.
4.
R
A L
E
S
U
U
A N
M
user manual
washer
2
1
2
3
CONNECTIONS
Speakers per Channel Connected in Parallel
2-CHANNEL AMPLIFIER WITH 8Ω OUTPUT
LEFT
RIGHT
4/8Ω
SPEAKERS PER CHANNEL CONNECTED IN PARALLEL
Underpower Vs. Overpower
1
Most speaker damage is caused by amplifiers with too little
power (wattage).
2
An overdriven amplifier clips the waveforms and leads to
speaker distortion.
3
Clipping is usually audible and it may vary from a harsh sound
to a fuzzy or unclear sound.
4
If you hear the clipping at high volume levels, turn down the
volume until the distortion is gone.
5
Damage caused by operating the speakers at distorted volume
levels is not covered by the warranty.
Observe correct
Polarity for maximum
Bass performance
4/8Ω