Follett U300 Series Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pembuat Es Follett U300 Series. Follett U300 Series 17 halaman. U300/ud300 series ice and beverage dispensers
Juga untuk Follett U300 Series: Panduan Instalasi (12 halaman)

Halaman Cetak

Electrical Specifications – 115V, 60Hz, 1 phase

U300 series dispensers with remote icemaker(s) require separate circuit and

disconnect for each icemaker and dispenser.

Single-sided models

U300 – dispenser 6.0 amps

U300B – dispenser 7.0 amps

U300R400A/W – dispenser 6.0 amps, icemaker 11.0 amps

U300BR400A/W – dispenser 7.0 amps, icemaker 11.0 amps

U300R800A/W – dispenser 6.0 amps, icemakers 11.0 amps each

U300BR800A/W – dispenser 7.0 amps, icemakers 11.0 amps each

Dual-sided models

UD300 – dispenser 8.0 amps

UD300R400A/W – dispenser 8.0 amps, icemaker 11.0 amps

UD300R800A/W – dispenser 8.0 amps, icemakers 11.0 amps each

Note: Each icemaker and dispenser require separate circuit with electrical disconnect within

10 feet (6m). Equipment ground required. Standard electrical – 115V, 60 Hz, 1 phase. Max. fuse

dispenser – 15 amps; each icemaker – 20 amps.

On all models with remote icemaker(s), black wire on icemaker control board

LINE VAC terminal must be moved to 24V terminal.

Plumbing

Do not reduce size of drain lines or tie drains together.

Dispenser – all models

3/4" PVC slip fit bin drain

1" PVC slip fit drain pan drain(s)

1" PVC slip fit beverage bath drain (units with beverage cooling only)

Note: Drains must be hard piped and insulated. Maintain 1/4" per foot (6mm per 304mm) min. slope

Icemaker – automatic load models only

1/4" FPT water in

1/2" MPT drain

3/8" FPT condenser inlet (water-cooled condenser only)

1/2" FPT condenser drain (water-cooled condenser only)

Note: Water disconnect within 10 feet (3m) of icemaker(s) is required for automatic load units