AmpliVox W355 Petunjuk Perakitan

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Sistem Podium AmpliVox W355. AmpliVox W355 2 halaman. Ready to assemble lectern

Halaman Cetak
Thank you for choosing the W355 Lectern from AmpliVox Portable Sound Systems.
We are excited in introducing this truly unique lectern. Our lectern combines flexibility
with functionality. Please refer to this user guide as you enjoy the unique capabilities of
another quality product from AmpliVox Portable Sound Systems.
We encourage you to visit our website www.ampli.com to register your product for its
warranty coverage, sign up to receive our newsletter, download our catalog, and learn
more about the complete line of AmpliVox audio visual products, including portable PA
systems, and other lecterns.
GETTING STARTED:
Lectern Parts
DESCRIPTION
Label
Reading Surface
Base
Column
TOOLS NEEDED: None
ASSEMBLY:
ATTACH COLUMN TO BASE:
Place the COLUMN (Label 3) on the floor laying on its side.
Bottom of column is flat, top is angled. Backside is the low
point of top angled surface. Take the BASE (Label 2), with
the large block facing the underside of column, insert the
block side into column. Secure with BASE SCREW (Item 6)
and one FLAT WASHER (Item 3) using the ALLEN
WRENCH (Item 5). Turn until screw is tight.
Screw the four BASE FEET (Item 7) into the inserts located
in the two wood rails at bottom of base.
ATTACH READING SURFACE:
Stand Column up.
Attach the MOUNTING PLATE (Item 1) to the COLUMN as
shown using PLATE SCREWS (Item 4) and ALLEN WRENCH
(Item 5). Position mounting plate so that the slot holes of plate are
over the edge. Align the other two holes with the threaded inserts
and securely tighten with the two screws.
Position the READING SURFACE (Label 1) with the wedge shape
wood block over the opening at the top of column. Lower onto col-
umn. The slots of the mounting plate should be in alignment with
threaded inset in reading surface. Take one THUMB SCREW
(Item 2) with a FLAT WASHER (Item 3) and going through slot in
mounting
plate, screw into insert until tight, securing reading sur-
face to column. Repeat again with other thumb screw.
Unpack all pieces. Save the packing and the box in case you need to return the lectern
for any reason. Make sure you have all the pieces and check for any damage.
ITEM
1
Mounting Plate
❶
2
Thumb Screws
❷
3
Flat Washers
❸
4
Plate Screws
5
Allen Wrench
6
Base Screw
7
Base Feet
HARDWARE
DESCRIPTION
QTY
1
2
3
1
2
1
1
4
Wood color in pictures may not match your lectern
Top of
column
Assembly Instructions
W355
Ready to Assemble Lectern
2
7
Bottom of
column
❸
❷
Item 5
Item 4
❶
CONTINUE
3
4
5
6
Item 7
Item 6 & 3
Base
Column
Opening
Item 1
Item 2 & 3