Comcater COMENDA Hi-Line HCXL Series Petunjuk Penggunaan dan Pemeliharaan Manual - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan dan Pemeliharaan Manual untuk Mesin pencuci piring Comcater COMENDA Hi-Line HCXL Series. Comcater COMENDA Hi-Line HCXL Series 19 halaman.

Halaman Cetak

Part 2: Reserved for Operator

2.9 REGENERATION CYCLE HC-HCXL

2.9.a FILLING THE SALT TANK

IMPORTANT

he tank is to be filled when alarm F4 appears on

the display.

First of all make sure that there is salt in the specific con-

tainer and proceed as follows:

1. Unscrew the cap of the salt tank and introduce coarse

kitchen salt.

2. Screw the plug back on all the way to make sure the

tank is sealed.

2.9.b RESIN REGENERATION OPERATIONS

(AUTOMATIC) (only for mod. " RA")

The resin is rinsed for a few seconds upon

every switch-on, and a MICROREGENERATION

cycle is then performed.

IMPORTANT

he MICROREGENERATION cycle takes place

in the background.

This could lengthen the cycle.

REGENERATION appears on the display

ATTENTION

For machines with RCD - HR-A partial regeneration can

only be activated with the tank level

2.9.c MANUAL REGENERATION OPERATIONS

(at the user's discretion)

With the machine ON, perform the following operations:

Touch the SCROLL key

Select the REGENERATION

function from the display

Touch the START key.

The REGENERATION phase

begins.

ATTENTION

t this point the dishwasher carries out all the necessary

operations automatically for a preset time, during which

the machine cannot be used.

At the end of the cycle, the ma-

chine switches off automatically

and the display reads OFF.

The machine is now ready for use.

ATTENTION

nly an authorised technician can program the

regeneration parameters.

ENGLISH

START

OFF