DP UG03-R1 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo DP UG03-R1. DP UG03-R1 2 halaman. Multi-room audio
Juga untuk DP UG03-R1: Panduan Pengguna (2 halaman)
Halaman CetakUsing the Remote Control
Using the remote contol you can adjust the volume of the speakers, mute, power on/off and switch between the Main Audio Source and Local Audio
Source.
Turn zone on / Select the
Main Audio Source
Press once
Blue
Adjust the volume
Using Infra-red Pass-through
Each Infra-red enabled pair of speakers has the ability to pick up infra-red commands and route them back to the system via the Multi-Room Audio Dongle
in the Main Living Space so that a hi-fi system or TV can be controlled from any zone. This can also be used to control a digital TV receiver for example,
allowing you to change channel from another room. To do this Window Emitters (supplied with the Dongle) must be fitted to the Multi-Room Audio Dongle
and stuck onto the infra-red receiver window of each piece of equipment.
In-ceiling speaker
Aim the remote control of
the device you want to
control at the in-ceiling
speaker Infra-red speaker
window
All equipment (included leads and cable for installation) can be bought from
FAQ sheets on the digitalplumbers wiring system and the services we can provide.
Document number UG03-R1
All manuals and user guides at all-guides.com
Select the Local Audio Source
Press until indicator green
Green
Mute the volume
Press once
PressVol+ to unmute
Connect to the infra-red receiver window of
each piece of hi-fi equipment you wish to
Window Emitters
Connect to the infra-red receiver
window to the Multi-room Audio
Dongle
If your speakers are not responding
try changing the battery in remote
control.
Only one speaker of each pair has
an Infra-red window on it, it is
identified by the LED light.
Flash
Window Emitters
control
digitalplumbers.com
- its easy. Refer to our website for useful
Call....
Turn a zone off
Press until indicator red
Red
CD Player
Radio
®
0870
850 1337