Carbex i-BRUSH 2.0 Panduan Keselamatan dan Operator - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Keselamatan dan Operator untuk Monitor Carbex i-BRUSH 2.0. Carbex i-BRUSH 2.0 7 halaman. Hmi display

Halaman Cetak

INSTALLATION

The i-BRUSH Display should be mounted within

100 meters of the i-BRUSH system. The i-BRUSH

Display should be securely fastened.

Connect the i-BRUSH Display to 1 10 – 230

■

VAC (1,8 A). Make sure that it is connected to

ground via the power cord.

Connect the barcode scanner to the

■

corresponding connector.

Connect the RJ45 cable from the i-BRUSH

■

system to the corresponding connector on the

i-BRUSH Display.

NOTE!

Make sure the i-BRUSH Display is turned off

before making any connections to it.

C A R B E X S A F E T Y A N D O P E R A T O R ' S M A N U A L – H M I D I S P L A Y | R E V I S I O N 1 . 0

OPERATION

To power up the i-BRUSH Display push the on/off

button on the power entry module.

After some seconds it will show the HMI.

MAINTENANCE

The I-BRUSH system does not require any special

maintenance. If the system stops working, do not

try to repair it or open it. Doing so will void the

warranty.

A broken system should in most cases be returned

to Carbex for repair – always contact Carbex first

and they will advise on the action to take.

CLEANING DANGER

Switch off the device and all connected devices, and

disconnect the device from the power supply.

The device can be cleaned with a soft, damp cleaning

cloth. Do not use any aggressive cleaning materials,

thinners, scouring material or hard objects that could

cause scratches.

R E V I S I O N 1 . 0 | C A R B E X S A F E T Y A N D O P E R A T O R ' S M A N U A L – H M I D I S P L A Y

SPARE PARTS LIST I-2BR-HMI-SMS-1000

COMPONENT

CARBEX ITEM NUMBER

DC supply

I-2BR-HDR-60-24

Fuse

I-2BR-101 1

Display

I-2BR-HMI-MONITOR

Touch pen

I-2BR-SMS-HMI-PEN

Barcode scanner

I-2BR-SMS-BARSCANNER

WARNING SYMBOL FOR

ELECTRICAL DANGER