Ampro TECSHOW MOVING QUAD SPIDER Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan DJ Ampro TECSHOW MOVING QUAD SPIDER. Ampro TECSHOW MOVING QUAD SPIDER 9 halaman. Beam moving head
Halaman Cetak
2. Press the "YES" or "NO" button to select
reverse or not reverse , choose "Yes" means
direction of Tilt2, choose "No" means negative
direction of Tilt2.
3. When you have found your desired setting press
ENTER to confirm.
LED - With this function you can have the LED
display turn off after 5 seconds.
1. Press the MENU button until "LED" is displayed,
press ENTER.
2. The display will show either "ON" or "OFF".
Press the UP or DOWN buttons to select "ON" to
keep the LED display on at all times, or "OFF" to
switch to have the LED display switch off after
10 seconds.
5. DMX CHANNELS
11 channel definition table
Channel
1
2
3
4
5
6
P. 6
Tecshow Moving Quad Spider |
English version
DISP - This function will reverse the display 180°.
1. Press the MENU button until "DISP" is
2. Press the UP button to select "DSIP" to reverse
3. Press ENTER to confirm. To make you LED
TEST - This function will run a self test program.
1. Press the MENU button until "TEST" is
RSET- This function will reset the program.
1. Press the MENU button until "RSET" is
DMX Value
0-255
0-255
0-255
0-255
0-255
000-007
008-015
016-131
132-139
140-181
182-189
190-231
232-239
240-247
248-255
displayed, press ENTER.
the display, or "DISP" to change the display
back.
display reappear again press any button.
displayed, press ENTER. Positions.
displayed, press ENTER. positions.
Function
Pan
Tilt 1
Tilt 2
P/t Speed
Dimmer from 0-100%
Strobe
Off
On
Strobe from slow to fast
On
Strobe Fast open slow close
On
Strobe Slow open fast close
On
Random strobe
On