Ampro ReadyPanel 6.5 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer Ampro ReadyPanel 6.5. Ampro ReadyPanel 6.5 20 halaman.

Chapter 1 ReadyPanel Setup

About the ReadyPanel

The ReadyPanel products are intended for users of turn-key embedded systems who prefer long life cycle,
configuration controlled computers over desktop grade systems with frequently changing motherboards.
ReadyPanel models feature the ReadyBoard single board computer (SBC), with a range of processors from
the Intel Celeron® M CPU to the Intel Pentium® M CPU, and a range of SODIMMs described in the
reference manual of each ReadyBoard product. The desired operating system (OS) is pre-loaded onto the
internal compact flash card. Just load your application software and you are ready to use your system
applications.

Using this Guide

This guide provides the most efficient way to set up your ReadyPanel with your desired operating system
(OS). The instructions provided in this guide include:
Removing the ReadyPanel from the shipping container and inspecting the accessories
Connecting peripherals to the ReadyPanel
Powering up the ReadyPanel
Information not provided in this User's Guide includes:
ReadyBoard specifications
Environmental requirements
ReadyBoard connector/pin numbers and definitions
Operating system programming or operating instructions
NOTE
Refer to Ampro's Linux OS manual or other OS manufacturers' manuals for
instructions when using OS software.

Requirements

The following peripherals and devices are needed to make full use of the ReadyPanel.
Peripherals (customer provided):
PS/2 keyboard and PS/2 mouse - optional
CRT or LCD monitor (VGA) - optional
Power Supply (customer supplied):
ATX, AT, or Dual Voltage Lab power supply (+5VDC to +12VDC)
CAUTION
Optional device/Peripheral connections:
Ethernet (LAN) connection
USB device connections
ReadyPanel
Using a power supply with a higher voltage will damage the system.
User's Guide
1