Follett FZR5 Panduan Pemasangan, Pengoperasian, dan Servis - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Pengoperasian, dan Servis untuk Pembeku Follett FZR5. Follett FZR5 20 halaman. Undercounter freezer
Juga untuk Follett FZR5: Panduan Pemasangan, Pengoperasian, dan Servis (20 halaman)
Halaman Cetak
Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Installing Legs – Required
1. Remove legs from plastic bag packed inside freezer.
2. Tip freezer back and screw legs in all the way to stop (Fig. 1). Legs
will extend 1/8" (3.175mm) below base of freezer.
3. Adjust legs as needed to level freezer in both directions. To access
legs, remove the lower front panel. Turn legs clockwise to extend
legs.
Installation Shelves – Required
1. Remove shelves and shelf brackets packed inside freezer.
2. Install shelf brackets in pilasters. Insert top tab, squeeze and push
in lower tab (Fig. 2).
Changing Temperature Controller Settings – Optional
Follett's temperature controller is pre-programmed with a -25 C (-13 F)
set point and degrees C display. The -25 C (-13 F) set point delivers a
temperature range of -23 to -25 C (-9 to -13 F).
Follett's controller set point can be changed to deliver up to a -15 C (+5 F)
temperature for applications where a lower temperature is not desired (i.e.,
ice cream). See
Controller Operation on page 7
4
FZR Undercounter Freezer
to change controller settings.
Fig. 1
Fig. 2
2
1
Fig. 3
3