Amprobe AC71B Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Multimeter Amprobe AC71B. Amprobe AC71B 19 halaman. Ac clamp multimeter

Product Maintenance

Do not attempt to repair this meter. It contains no user serviceable

parts. Repair or servicing should only be performed by qualified

personnel.

To clean the meter, periodically wipe the case with a soft moistened

cloth. To avoid damage to the plastic components do not use

benzene, alcohol, acetone, ether, paint thinner, lacquer thinner,

ketone, or other solvents to clean the meter.

If the meter appears to operate improperly, check the following

items first.

. Review the operating instructions to ensure the meter is being

used properly.

. Make sure the battery is in good condition. The low battery

symbol � appears when the battery falls below the

level where accuracy is guaranteed. Replace a low battery

immediately.

To replace the battery

. Turn the meter off and remove attached test leads.

. Loosen the screw and remove the battery door.

3. Replace the battery using an alkaline 9 V battery. See General

Specifications for detailed battery specifications.

4. Replace the battery cover and tighten the screw. Recycle the

battery using approved methods.

To avoid electrical shock, remove the test leads from

both the meter and the test circuit before accessing

the battery.

��WARNING

See Figure -0-