Acer 7763PA - PalmPro SVGA DLP Projector Panduan Pengoperasian - Halaman 28
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Proyektor Acer 7763PA - PalmPro SVGA DLP Projector. Acer 7763PA - PalmPro SVGA DLP Projector 37 halaman. Digital multimedia projector
Juga untuk Acer 7763PA - PalmPro SVGA DLP Projector: Panduan Pengoperasian (35 halaman)
Halaman Cetak
System
To select the input video system standard. When an AV
box
automatically detect the video system. Users also can
select desired video systems. When selecting system,
the
simultaneously, and the OSD will still exit on the
screen. The default setting of System is "Auto" (See
Figure 25).
Color
(Less)
(Red)
Tint
*
Tint may not be adjusted with PAL/SECAM video signal input.
C
Control Page
When users go into the Control sub-
page, the first item "Auto" will be
highlighted. There are five items on
this page: Reset, Language, Mirror,
Auto Off and Reset (Fig. 26).
To reset display, image and control settings to factory
Auto
settings.
Language
To select the OSD menu language. Seven languages are
supported: English, French, German, Italian, Spanish,
Simple Chinese and Chinese. (See Figure 26).
To select Normal projection, H-Invert projection, V-
Mirror
Invert projection, or H/V Invert projection.
To set the time to turn the power off after the start up
Auto Off
screen is displayed and no signal is detected or sync is
out of range. To select, use "3" (KEYSTONE-) or "4"
(KEYSTONE+) to set the time. 0 means Auto Off function
inactive.
*Default setting is 0 (stop).
The usage time of lamp will display on this item. And
Lamp
you can reset the usage time of lamp from this item
after you change a new lamp. ( See page 18 )
or
turner
projector
Figure 26 Control sub-page
box
is
attached,
will
detect
(More)
(Green)
Setting effects
the
projector
the
selected
Source
is
or S-Video
will
system
Video
English 23