Amprobe AMB-50 Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji Amprobe AMB-50. Amprobe AMB-50 17 halaman. 5000v insulation resistance tester

Halaman Cetak

• Turn the Meter to OFF when it is not in use.

• Take out the battery when it is not using for a long time.

• Do not use or store the Meter in a place of humidity, high temperature, explosive,

inflammable and strong magnetic field.

• If the Meter is wet, dry it before use.

�WARNING!

• Do not attempt to repair or service your Meter unless you are

qualified to do

• Bring this line up.This is one sentenceso and have the relevant calibration, performance test,

and service information.

Replacing the Battery

�WARNING!

To Avoid Electric shock, remove all the test leads from the Meter replacing the batteries.

�OPERATING CAUTION!

• Don't mix old and new batteries.

• Make sure the polarity is correct when installing batteries.

• Do not use the Meter if the battery indicator (

• Do not carry out measuring with the battery compartment is open.

Follow the shown picture and proceed as follows to replace the battery:

• Turn the Meter to OFF and remove all connections from the terminals.

• Remove the screw from the battery compartment, and separate the battery

• compartment from the case bottom.

• Replace with 6pcs of new 1.5V (LR14) batteries.

• Rejoin the case bottom and battery compartment, and reinstall the screw.

) shows a battery empty condition