DPL Flex Mitt Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Medis DPL Flex Mitt. DPL Flex Mitt 8 halaman.

VI. Assembly Instructions

1. Insert USB plug from pad into provided USB power supply.

2. Plug USB power supply into electrical outlet.

3. Insert hand into dpl® Flex Mitt.

4. Press On/Off switch to the on position to start device.

5. Move On/Off switch to the off position to stop device.

VII. Instructions for Use

1. Insert USB plug from pad into provided USB power supply.

2. Plug USB power supply into electrical outlet.

3. Insert hand into dpl® Flex Mitt.

4. Press On/Off switch to the on position to start device.

5. You can only see the red LEDs; the other LEDs are in the infrared light

spectrum and can't be seen with the human eye.

6. Recommended treatment time is 20 minutes. The device may be used

multiple times per day.

7. Move On/Off switch to the off position to stop device.

VIII. Technical Specifications

• Model No: DPLPNMITT

• ONLY USE SUPPLIED USB Power Supply.

• Device includes on/off switch; all settings are set at the factory.

• The dpl® Flex Mitt is NOT user serviceable.

• Operating Temperature: 0°C to +27°C (32°F - 80°F)

• Relative Humidity: 85%

• Storage Temperature Range: -30°C to +55°C (-22°F to +130°F)

• Wavelengths: Infrared LED 880nm, RED LED 660nm

• Electrical Ratings: AC to USB Adapter; Input 100-240V, 50/60Hz 0.1 A.

Output: 5.0V 1000mA