Amptek X-123 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Alat Ukur Amptek X-123. Amptek X-123 4 halaman.
Juga untuk Amptek X-123: Panduan Pengguna (12 halaman), Panduan Pengguna (18 halaman)

Halaman Cetak

For Windows 98 or Windows ME:

a. The "Add New Hardware Wizard" should automatically appear when the X-123 is connected and powered on for the first

time. Click Next >.

b. Select "Search for the best driver for you device" and click Next >.

c. Select only "Specify a location:", click "Browse" and navigate to the \USB_driver\Win98_ME folder of the Amptek

Installation CD. Click Next >.

d. Windows is now ready to install the driver. Click Next >.

e. Click Finish. The USB driver should now be installed.

4. Now that the USB driver is installed, the display and control software can be loaded onto the PC. Locate the directory

called "ADMCA" on the Amptek Installation CD and copy the entire directory onto your computer. In that directory is the

"ADMCA.exe" file. Open this file to start the software. You can right-click on the ADMCA.exe file and create a shortcut

which can be palced on your desktop for easy access.

X-123 Connection Instructions

1. Verify that the X-123 is completely unplugged (both USB and power).

2. Use the USB cable to connect the X-123 USB connector, which is located on the back panel, to the PC's USB connector.

3. Plug the DC power supply into a 110/220 AC outlet. Connect the other end to the X-123 power supply input, which is

labeled "5VDC" and is located on the back panel.

NOTE: Grounding is critical to obtaining the best performance. Specifically, we strongly recommend using a single point

ground for the system. To ensure this, use a 3-prong to 2-prong adapter on the power supply of any notebook computer.

This prevents the notebook from introducing a second ground into the system.

X-123 Spectrometer

XR100CR

X-Ray Detector

and Preamplifier

Detector H.V., Cooler Power, Preamp Power

Figure 1: Connection Diagram

USB/

DP4

RS232

DIgital Pulse

+/-5V,

Processor

+3.3V

X-123 Quick Start Guide Rev A1

USB/

RS232

PC4-3

Power Supply

& Interface

Board

+5VDC

Power

Adapter

Page 2 of 4