fomex HD900 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan fomex HD900. fomex HD900 12 halaman. Hd series

Directions for replacing parts

1. Replacing the modeling lamp (BASE: GX-6.35)

- After cooling the lamp enough, maneuver it left and right to separate it from the socket.

- Maneuver the new lamp left and right to install it onto the socket.

- Be careful not to let any finger print or dust stain the lamp, and clean the lamp with

soft cloth or tissue lightly dampened with alcohol after replacing the lamp.

2. Replacing the fuse

- Separate the power cord from the AC socket

- Eject the fuse holder using a straight (-) screwdriver

- Remove the existing fuse and install the spare fuse, which is also inside the fuse

holder.

- Be sure not to let dust stain the discharge tube and modeling lamp with replacing

the fuse.

- If dust or other materials get stuck to the discharge tube or lamp, it can shorten

the life of the lamp and deteriorate the color temperature, thus clean any impurities

with a soft cloth.

※ Reference :

When input voltage is lower than rated voltage, there can be cases where it's not

charged fully for maximum output. So in this case, check the input voltage.

HD SERIES