fomex HDp Series Manual - Halaman 6
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pencahayaan fomex HDp Series. fomex HDp Series 11 halaman.
Halaman Cetak
Replacement and maintenance
A. How to replace a modeling lamp.
Screw type (Base : E-11)
1.
Turn OFF the power and unplug the power cord from the AC socket.
2.
Turn it counterclockwise and remove the modeling lamp.
3.
Turn the new modeling lamp clockwise to install.
(Please make sure your hands are dry.)
4.
Be careful not to allow any fingerprints, dust or stains on the lamp.
When a foreign substance is present clean with a soft cloth.
Pin type (Base : GX-6.35)
1.
Allow the modeling lamp to cool down enough.
2.
Turn it counterclockwise and remove it.
3.
While assembling, turn it clockwise and then reassemble it.
4.
Be careful not to allow any fingerprints, dust or stains on the lamp.
Clean it with a soft cloth applied with alcohol after replacement.
B. How to replace a fuse.
Turn OFF the power and unplug the power cord from the AC socket.
1.
2.
Use a (-) screwdriver and open the fuse box to pull out the fuse.
Check if the fuse is blown and replace it with the spare
3.
fuse placed inside the fuse box.
C. Maintenance
Be sure not to let any dust or other stains on the flash tube
and modeling lamp.
Wipe off any dust or foreign matter on the tube/lamp with a soft cloth.
It may shorten the lifespan and deteriorate the color temperature.
5