DPS SPS 8 Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Beralih DPS SPS 8. DPS SPS 8 8 halaman. 8 port serial switch

Operation

Dumb Terminal Operation

With a dumb terminal at the common port (either directly or

via some transport media), use the following procedure to se-

lect the desired ASCII port:

1. After the terminal is connected, type @@@.

2. At the prompt, the currently selected port number will be

displayed.

3. Type S followed by the number of the desired port

<Enter>.

4. Type C<Enter> to connect to the desired port.

Operation via Net Dog

To access the common port of the SPS 8 using the Net Dog's

reach through capability:

1. Connect a Telnet Client to TCP port 2002 at the address of

the desired Net Dog.

2. Get the clear channel.

3. After the terminal is connected, type @@@.

4. At the prompt, the currently selected port number will be

displayed.

5. Type S followed by the number of the desired port

<Enter>.

6. Type C<Enter> to connect.

D-PC-186-10A-XV

September 16, 1999

OG119699