DPS TS-50 Petunjuk Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pompa Air DPS TS-50. DPS TS-50 10 halaman.

Disconnect all power sources to ensure the pump will remain inoperative

Allow the pump to cool before starting maintenance

Close the suction and discharge valves if fitted

Vent the pump slowly and cautiously

Drain the pump

When working near the pump, dress appropriately, avoid baggy or loose

items which could get caught in moving parts. Always wear safety clothing,

gloves, safety glasses, helmet etc.

This pump is designed to handle mild industrial corrosives, mud and slurries

containing solids. Do not attempt to pump volatile, corrosive or flammable

liquids that may damage the pump or endanger personnel.

Use lifting and moving equipment with ample capacity and in good repair.

Remove all suction and discharge piping before lifting.

Do not remove any items from an overheated pump. Pressure build up

within the pump can cause parts being disengaged to be ejected with force.

Allow the pump to cool before commencing any maintenance.

Do not operate the pump with a closed discharge valve for any length of

time. Running the pump in this configuration could cause the liquid to boil

and cause the pump casing to explode.

Do not operate the pump without all guards in place over rotating parts.

After the pump has been positioned make sure all the pump mountings and

any fixtures are properly secured and supported before operation.

Safety Warning