DQ Vela Electric Petunjuk Manual - Halaman 12
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pemanas DQ Vela Electric. DQ Vela Electric 18 halaman.
Juga untuk DQ Vela Electric: Instalasi dan Perbaikan (4 halaman), Petunjuk (2 halaman)
Halaman Cetak
WI-FI MODULE
To activate the Wi-Fi module and control the domestic radiators remotely, proceed
as following:
1) Go to the Wi-Fi area of the application [Fig. 16a];
2)Select ADD WI-FI [Fig. 17b];
3)Select ADD THERMOSTAT NOT YET CONNECTED TO THE HOME NETWORK [Fig. 16c];
4) Activate the Wi-Fi of the smartphone / tablet;
5) Connect to the thermostat's Wi-Fi network;
6) The application will ask you to connect to the home network.
7) Enter the password for the home router. (ATTENTION: if you enter a password
wrong pass, activate RESET procedure: press the connection button on the
thermostat for 15 seconds.)
8) Select ADD WI-FI again [Fig. 16b];
9) Select ADD THERMOSTAT ALREADY CONNECTED TO THE HOME NETWORK [Fig. 16c];
10) At this point, scan the QR code provided with the thermostat packaging;
11) Rename the radiator as you prefer.
REMOTE CONTROL
As an alternative to the application, the electronics also communicate with a remote control
which can be purchased on request.
The remote control has a wireless connection: it can be portable or attached to the wall near
the radiator (max. 4 meters).
Using the remote control, it is possible to control the SMART thermostat with the
same operating modes: Stand-by, Fil Pilot, Comfort, Night, Antifreeze, Thermostat
Programmable, BOOST 2H, ECO, detection of open windows, ASC.
For more information and detailed instructions, see the website.
[Fig. 17]
www.ridea.it
or write to