DQ Vela Electric Petunjuk Manual - Halaman 15
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pemanas DQ Vela Electric. DQ Vela Electric 18 halaman.
Juga untuk DQ Vela Electric: Instalasi dan Perbaikan (4 halaman), Petunjuk (2 halaman)
Halaman Cetak
SPECIFICATION OF FUNCTIONS
WITH THE REMOTE CONTROL
Please note: all of the following operations are related to the remote control
Press the ON / Stand-by button to turn on the device or activate the "Stand-by" mode. When the unit is active, the
setting mode and temperature are displayed. During the "Stand-by" state, the display shows the On / Off symbol, the
current time and the day of the week. NOTE: when the device goes into "Stand-by" mode, 2 beeps of 0.5 seconds
are emitted. When the device is on, it emits two beeps lasting one second.
COMFORT/NIGHT
Two different temperature levels can be set:
"CONFORT" TEMPERATURE: It's the temperature used for Chrono, Fil Pilote and Comfort modes.
"NIGHT" TEMPERATURE: it's the temperature used for the Night, Chrono and Fil Pilote modes. The regulation of
the desired temperature can be managed pressing on the keys [+] and [-].
The range of regulation of the temperature is between 7 ° C and 30 ° C.
IMPORTANT! The "Night" temperature is always lower than the "Comfort" temperature and priority is given to the
"Comfort" temperature. For this reason, the "Night" temperature can be set in the range 7 ° C ÷ (selected comfort
temperature), the "comfort" temperature can be set over the whole range: 7 to 30 ° C.
The "Comfort" mode allows you to maintain the set room temperature. To adjust this mode: Press the [Prog] key
until the "Comfort" mode icon appears on the screen. Set the desired temperature with the [+] and [-] buttons.
In "Night" mode, a temperature lower than the "Comfort" temperature is set. It is recommended to use this mode at
night or when the room is not used for 2 hours or more. Press the [Prog] key until the "Night" icon appears on the
display. Set the desired temperature with the [+] and [-] buttons.
ANTIFREEZE
In "Antifreeze" mode, the temperature is set at 7 ° C. The device activates the heating element when the ambient
temperature drops below 7 ° C. It is recommended to use this mode when the room is not used for several days.
Press the [Prog] key until the "Antifreeze" icon appears on the display.
BOOST 2H
The "Boost 2h" mode allows you to quickly heat the room or speed up the drying of towels.
- Press the [Prog] key until the "2h" icon appears on the screen.
The appliance is switched on at maximum power for 2 hours, with a temperature set at 30 ° C. The "Boost 2h" mode
is set to stop automatically after a period of 2 hours and return to the previously set operating mode. If necessary,
the user can return to other modes at any time by simply pressing the [Prog] key.
FIL-PILOTE
It is possible to connect the thermostat to a Fil-Pilote control unit.
NOTE: this connection is only possible for Class II models supplied without plug.
MADE IN ITALY