Dquad FIXATION Petunjuk Perakitan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Aksesori Drone & Quadcopter Dquad FIXATION. Dquad FIXATION 5 halaman.

FIXATION 5 INCH ASSEMBLY INSTRUCTIONS

INCLUDED PARTS:

(4) M3x10mm countersunk titanium bolts

(4) M3x14mm countersunk titanium bolts

(4) M3x6mm button head titainium bolts

(4) M3x25mm button head titanium FC stack bolts

(12) M3x8mm button head titanium motor bolts

(4) M3 nylon FC stack nuts

(1) Large Dquad lipo strap

(4) M3x25x5mm aluminum standoffs - black

(1) Lite grip lipo pad

For the best flight performance and to prevent premature carbon fiber failure, it is recommended to follow the

assembly instructions and to apply medium threadlocker to and adequately tighten all frame bolts.

STEP_01

INSERT THE ARMS INTO THE BOTTOM PLATE ARM CHANNELS

Set the arms in the milled arm channels on the bottom plate. If you are finding it difficult to fully seat an

arm, due to carbon fiber manufacturing tolerances it may be necessary to lightly file the edge of the arm

where it meets the bottom plate and main plate arm channels.

Now take the main plate and test that the arms fit in and seat fully into the main plate

arm channels. Lightly file the edge of the arms if necessary.

(1) Fixation sticker

(1) Bottom plate - 3mm

(1) Main plate - 20x20 and 30x30 - four press

nuts inserted - 3mm

(2) Camera plates - 2mm

(4) 5.1 inch arm - 5mm

(1) Race top plate - 2.5mm

(1) HDZero top plate - 2mm