AMS AS3933 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Motherboard AMS AS3933. AMS AS3933 20 halaman. Standard board, dev system, demo kit

AS3933 Standard Board

4.3

Description of the GUI of the Transmitter

Figure 9: Transmitter tab of the AS3933 GUI

All adjustments can be saved via Store Settings in the lower right corner of the Transmitter tab. If all

settings should be reset to the default configuration push the button Restore Default Settings.

4.3.1 Duration of Carrier Burst

The duration of the carrier burst can be set in multiples of carrier cycles (0-500 x 8µs) or in

milliseconds (1-3).

The carrier burst must be followed by a separation bit and at least 3 symbols preamble. The actual

number of preamble symbols can be adjusted here.

The symbol rate can be adjusted between 512 Symbols/s and 4096 Symbols/s. The symbol rate

must be the same as at the settings made with the AS3933 Demoboard.

The transmitter board sends out a tone whenever a packet is transmitted. This tone can be disabled

here.

ams Demo Kit Manual, Confidential

Page 12

[v1-02] 2014-Jul-11

Document Feedback