Comelit KSW3207LU Panduan Pengguna - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Comelit KSW3207LU. Comelit KSW3207LU 19 halaman. Wireless intruder alarm control panel
Juga untuk Comelit KSW3207LU: Panduan Pengguna (12 halaman)
Halaman Cetak
Alarm options
The "Alarm options" menu is used to change some control panel settings which may vary depending on the end user's preferences and routines.
• Voice guide
This menu can be used to enable or disable the voice guide function which uses the loudspeaker built into the control panel to confirm, in hands-free
mode, the main actions carried out by the control panel.
• Enabled
• Disabled
• Areas auto-arm.
This menu can be used to specify whether the system areas are enabled or not, for automatic arming by means of timers (automatic
arming).
• Area 1 - Area 4
• Buzzer enable
This menu is used to enable or disable sounds emitted by the buzzer built into the control panel for each of the situations listed below. The buzzer
emits a different sound for each of the various procedures listed.
• Entry time: enables sound alerts during the entry delay.
• Exit time: enables sound alerts during the exit delay.
• Alarm: enables alarm sound alerts on the control panel. This setting does not affect the operating mode setting for the external siren.
• Auto-arm warning : enables sound alerts during the pre-alert period set by the installer for automatic armings.
• Chime: enables the sound alert corresponding to the activation of zones with the "Chime" attribute.
• Key press: enables the sound alert corresponding to the pressing of every button.
• Arm/disarm: enables the sound alert confirming that arming or disarming has taken place.
• Fail to set : enables the sound alert corresponding to a lack of arming (fail to arm upon exit).
• Show bypass zone
This menu can be used to enable or disable the option of viewing bypassed / isolated zones by pressing the Enter button on the keypad. See page 6.
• Enabled
• Disabled
Video settings
This menu is used to change some of the settings corresponding to the control panel, and those set by the installer for video functions.
Video settings
Entrance camera
•
Recorded stream: used to set which of the video streams corresponding to the selected camera should be used to record alarm videos. Contact your installer
for further information.
•
Recording mode: used to select which mode the selected camera will run in.
◊
Alarm rec mode: selecting this operating mode sets the selected camera to only record videos relating to alarm events. Contact your installer for further
information.
◊
On local SD: for future uses.
Communications
Phonebook
•
Phonebook: this menu is used to manage phonebook contacts registered on the system by your installer.
• Call: used to call the telephone number associated with the contact.
• Edit: this menu is used to edit the following parameters for the selected contact.
◊
Description: this menu is used to edit the name of the contact shown on the display.
◊
Phone number: this menu is used to edit the telephone number of the selected contact.
◊
Email: edit the email address associated with the contact.
◊
Disable APP: this procedure disables the Comelit app for this contact, who will no longer be able to use the system via the Comelit app.
• Call number: this menu can be used to call a telephone number using the number keypad. Module
HUB2G or HUB3G is required for this function, to manage calls over the GSM network.
2way audio sett
• Enabled: if this option is selected, the two-way audio function will be enabled, allowing the users to begin a two-way audio communication with the
control panel by calling the telephone number of the control panel SIM. This function requires a HUB2G or HUB3G GSM module.
• Disabled: if this option is selected, the two-way audio function will be disabled.
14
Entrance camera
Recorded stream
Entrance camera
Recording mode