AMS TMD2620 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol AMS TMD2620. AMS TMD2620 13 halaman. Proximity sensor evaluation module
Juga untuk AMS TMD2620: Panduan Memulai Cepat (5 halaman), Panduan Pengguna (14 halaman)

Halaman Cetak
AMS TMD2620 Panduan Pengguna
When the USB cable is connected, the green LED should flash indicating that power is being
received via the USB interface, and the controller board processor is running. If the green LED does
not flash, check the USB cable connections; unplug the USB cable and try again. If the green LED
still does not flash, check the PC for USB error messages. See the Resources section at the end of
this document for additional assistance.
page 4/13