ams AG AS5132 Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Konverter Media ams AG AS5132. ams AG AS5132 14 halaman. 8 bit programmable high speed magnetic rotary encoder

Halaman Cetak

AS5132 Demoboard OPERATIONAL MANUAL

4 AS5000 Programmer GUI software

4.1

Installing the GUI on the PC

The preliminary software is developed for a Microsoft Windows 7. For Microsoft Windows XP the dotnet (.NET)

framework version 2.0 or more must be installed on the PC. This package can be downloaded free of charge from the

Microsoft webpage:

http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en

Following Procedure is recommended before starting the GUI:

check on your PC if Service Pack 2 is installed ( Only for

install the mentioned .NET package to your computer

execute setup.exe

Finally start the GUI using the shortcut in the start menu or desktop.

4.2

The Home tab

Figure 3 shows the main window of the GUI. On the top left corner, board informations as firmware (FW) version and

demoboard name declaration can be found.

By default the GUI is in the auto detection mode. Any connected austriamicrosystems demoboard and programming tool will

be automatically detected and displayed in the right top corner. The GUI is divided into three main sections HOME, TWI and

OTP.

By selecting the TWI (AS5132 bidirectional serial protocol) tab, the information of the angular position and the status bits

appears. See figure 4.

Revision 1.0, 04-April-2012

Figure 3: AS5000 GUI detected the AS5132 Demoboard

www.austriamicrosystems.com

Page 3 of 13