AmScope 120 Series Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mikroskop AmScope 120 Series. AmScope 120 Series 20 halaman.

120 Series

1. First, take the styrofoam container out of the cardboard carton and lay it on its side, paying attention to which

side is labeled up. Remove the tape and open the container carefully so as to avoid dropping and damaging the

optical items. Check carefully to ensure that all parts and accessories are intact.

2. Check the packing list to ensure that you're received all items:

- One Siedentopf Microscope Head (Binocular or Trinocular)

- One Microscope Base

- Four DIN Standard Objectives (4x, 10x, 40x, 100x)

- 10x Widefield Eyepieces

- 16x Widefield Eyepieces (for -A models only)

- 20x Widefield Eyepieces (for -B models only)

- Blue Color Filters

- One Bottle of Immersion Oil

- One Spare Fuse

- One Dust Cover

- One Blue Color Filter

Note: LED models do not have a spare bulb, as the LED bulbs do not need replacing.

3. Remove the microscope body from the box and remove the plastic protective covering. The body of the micro-

scope is composed of the base, the stage, the arm, the nosepiece, and the head.

4. Remove the eyetube caps and drop the desired eyepieces into the eyepiece ocular tubes. Be sure to avoid

touching the lens to ensure no artifacts appear in your image.

5. Screw the objectives into the microscope nosepiece from the lowest magnification to the highest, again avoid-

ing touching the lenses.

6. Plug in the microscope and turn it on. If no light emerges from the light source, adjust the dimmer knob on

the side of the base.

Getting Started