AmScope B110C Panduan Produk - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Produk untuk Mikroskop AmScope B110C. AmScope B110C 10 halaman. 40x-1000x dual led, ergonomic, lab binocular compound microscope with 3d two-layer mechanical stage
Halaman Cetak
1. Assembly and Setup
The Siedentopf binocular head has a comfortable 38° incline, can be rotated 360°, and provides interpupillary and
dioptric adjustments to suit any user.
CAUTION: Never lift the microscope by the head. If the head is not properly seated, it can become separated, causing
the body to fall, or otherwise damage the coupling mechanism. During transport, hold the microscope by the body in an
upright position to prevent the head, eyepieces, or other parts from falling.
1.1 Eyepieces
focus, rotate the dioptric adjuster until the left eye achieves sharp focus.
B110 User Manual
This microscope uses 23.2mm eyepieces which can be easily mounted to
or unmounted from the ocular tubes on the front of the head. During
transportation, the eyepieces should not be mounted to the head to
avoid falling. Dust caps should be inserted into the ocular tubes, or
alternatively an anti-static cover can be placed over the head to prevent
dust contamination. To use this instrument for standard observation,
eyepieces must be attached to produce a viewable image.
Insert a pair of eyepieces into the ocular tubes. Ensure that the
eyepieces have matching magnification, as some models contain
multiple pairs of eyepieces with different magnifications. Once attached,
adjust the diopter ring on the left ocular tube until it is neutrally aligned
(no dioptric adjustment).
The dioptric adjuster can be used if your eyes do not focus the same.
This process requires a specimen to be in place with the illuminator
active. Begin the process by setting the dioptric adjuster on the left
ocular tube to a neutral position. Next, use the focus knobs to bring the
image to sharp focus for your right eye. Once the right eye attains sharp
Page 5