Electrolux # Panduan Pemilik - Halaman 4

Halaman Cetak

Drying Procedures

To reduce the risk of ﬁ re, electric shock or in-

jury to persons, read the IMPORTANT SAFETY INSTRUCTIONS

in this Use and Care Guide before operating your dryer.

(Mesh bag not included.)

Clean the lint ﬁ lter after

every load.

1. Prepare load for drying.

•

Dry items of similar fabric, weight and construction in

the same load.

•

Separate dark items from light-colored items. Separate

items that shed lint from those that attract lint.

•

Check for stains which may not have been removed in

washing. Repeat stain removal process and wash again

before drying. Dryer heat may permanently set some

stains.

•

Place delicate or small items in a mesh bag.

•

Be sure buckles, buttons and trim are heatproof and

won't damage the drum ﬁ nish. Close zippers; fas-

ten hooks and Velcro®-like fasteners. Tie strings and

sashes to prevent snagging and tangling.

Check that the lint ﬁ lter is clean and in place.

Load the dryer and close the door.

•

Load items loosely. The average wet load will ﬁ ll the

drum 1/3 to 1/2 full. Items need room to tumble freely

for even drying and less wrinkling.

•

If desired, place a dryer fabric softener sheet on top of

the load at the beginning of the cycle.

•

To save energy and time and avoid uneven drying and

wrinkling, do not overload the dryer.

•

When drying large items, dry only two or three items

at a time. Fill out the load with small and medium sized

items.

•

For delicate or very small loads, add two or three simi-

lar items to improve tumbling action.

Select the appropriate cycle and settings for each

load.

•

See

Operating Instructions for your speciﬁ c model.

Start the cycle.

•

To add or remove items when the dryer is running,

open the door. The dryer will stop when the door is

opened. Allow the drum to come to a complete stop

before reaching inside.

•

Close the door and press Start to resume the cycle.

When the cycle ends, remove items immediately

and hang or fold.